airMAX™ Carrier Class 2x2 PtP Bridge Dish AntennaModel: RD-2G24
14. Visually align the azimuth and elevation. a. To adjust the azimuth, rotate the RocketDish while it is supported by the Stabilizer Brackets. b. T
SpecificationsRocketDish RD-2G24Dimensions 650 x 650 x 295 mmWeight 9.8 kg (Mount Included)Frequency 2.3 - 2.7 GHzGain 24 dBiHPOL Beamwidth 3.8° (RX D
Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.W
Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from de
ReturnsNo Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS d
Limitation of LiabilityEXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE
RoHS/WEEE Compliance StatementEnglishEuropean Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging
EspañolLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junt
Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal
Italiano [Italian]Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre dis
IntroductionThank you for purchasing the Ubiquiti Networks™ RocketDish™, an airMAX™ Carrier Class 2x2 PtP Bridge Dish Antenna. This Quick Start Guide
J060513—720-00040-01www.ubnt.com© 2012-2013 Ubiquiti Networks, Inc. All rights reserved.
Installation Requirements• RocketM2 (sold separately)• Phillips #1 screwdriver• 16 mm or 5/8 in. wrench• 24 mm wrench• Shielded Category 5 (or ab
Hardware InstallationImportant: Handle the Dish Reflector with care. Deformations in its shape may reduce the RocketDish's effectiveness.1. Each
3. Attach the RocketM to the Dish Reflector. a. Align the mounting tabs on the back of the RocketM with the Rocket Mounting Bracket located below th
5. The Elevation Rod includes washers and nuts. Remove one washer, one spring lock washer, and one nut. Use them to secure the Elevation Rod when ass
9. Each M10x25 Carriage Bolt includes a washer, spring lock washer, and nut. Remove these and use them to secure the bolts when assembling. 10. Attac
11. Each M10x100 Bolt includes a washer, spring lock washer, and nut. Remove these and use them to secure the bolts when assembling. 12. Attach the St
13. Attach the Main Mounting Bracket to the pole just above the Stabilizer Brackets.a. Slide a Pole Clamp over each pair of M10x150 CarriageBolts. b
Comments to this Manuals