Enterprise WiFi SystemModel: UAP-Outdoor+
3. Wrap the Metal Strap around the pole. Use a flathead screwdriver to turn the screw clockwise and securely fasten the strap to the pole.
Antenna InstallationConnect each Antenna to a RP-SMA connector by rotating it clockwise.
Powering the UniFi APThe UniFi AP can be powered by the included PoE Adapter or a compatible PoE switch.1. Lift the locking tab of the Port Cover and
Connecting to the PoE Adapter1. Connect the other end of the Ethernet cable to the Ethernet port labeled POE on the PoE Adapter.2. Connect an Ethern
Connecting to a PoE SwitchConnect the other end of the Ethernet cable coming from the UniFi AP directly to a PoE port on one of the following:• 48V,
SpecificationsUAP-Outdoor+Dimensions 205 x 83 x 37 mmWeight 250 g Networking Interface (2) 10/100 Ethernet PortsButtons ResetAntennas (2) 5 dBi Antenn
Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.W
Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from de
DisclaimerEXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE
NoteSome countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You
IntroductionThank you for purchasing the Ubiquiti Networks™ UniFi™ Enterprise WiFi System. The UniFi Enterprise WiFi System includes the UniFi Control
Industry CanadaThis Class A digital apparatus complies with Canadian ICES-003.To reduce potential radio interference to other users, the antenna type
RoHS/WEEE Compliance StatementEnglishEuropean Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging
EspañolLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junt
Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal
© 2013 Ubiquiti Networks, Inc. All rights reserved. PH072513Italiano [Italian]Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS
Package ContentsUniFi AP Outdoor+ Antennas (Qty. 2) Wall Mount BracketMetal Strap Screws (M2.9x20, Qty. 3)Screw Anchors (M3x20, Qty. 3)Enterprise WiF
Network Topology Requirements• A DHCP-enabled network for the AP to obtain an IP address (wireless clients will also obtain IP addresses after deploy
Hardware OverviewLEDLED Color StatusFlashing WhiteInitializing.Steady WhiteFactory default, waiting to be integrated.Alternating White/BlueDevice is b
*720-00028-01*720-00028-01PortsMainEthernet Port(10/100 Mbps)ResetButtonSecondaryEthernet Port(10/100 Mbps)Secondary The Secondary Ethernet port is u
Hardware InstallationThe UniFi AP can be mounted to a wall or on a pole. Perform the steps for the appropriate installation:Wall MountTo mount the AP
6. Align the mounting tabs on the UniFi AP with the notches on the Wall Mount Bracket, and slide the UniFi AP down until it locks into place.
Pole MountTo mount the UniFi AP on a pole, use the included Metal Strap:1. Turn the screw on the Metal Strap counter-clockwise to open the strap. 2.
Comments to this Manuals