Ubiquiti Networks RD-5G31-AC Datasheet

airMAX® Carrier Class 2x2 PtP Bridge Dish AntennaModel: RD-5G31-AC

11. Each M10x100 Bolt includes a washer, spring lock washer, and nut. Remove these and use them to secure the bolts when assembling. 12. Attach the St

13. Attach the Mounting Bracket to the pole just above the Stabilizer Brackets.a. Slide a Pole Clamp over each pair of M10x170 CarriageBolts. b. Se

14. Visually align the azimuth and elevation. a. To adjust the azimuth, rotate the RocketDish while it is supported by the Stabilizer Brackets. b. T

SpecificationsRocketDish RD-5G31-ACDimensions 748 x 748 x 349 mm (29.45 x 29.45 x 13.74 in)Weight 7.6 kg (16.76 lb)(Mount Included)Frequency 5.1 - 5.8

Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.W

Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from de

ReturnsNo Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS d

Limitation of LiabilityEXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE

ComplianceRF Exposure WarningThe antenna and transmitter must be installed to provide a separation distance from all persons and must not be located o

RoHS/WEEE Compliance StatementEnglishEuropean Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging

IntroductionThank you for purchasing the Ubiquiti Networks™ RocketDish™, an airMAX® Carrier Class 2x2 PtP Bridge Dish Antenna. This Quick Start Guide

EspañolLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junt

ItalianoLa direttiva europea 2002/96/EC richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non siano

Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal

Italiano [Italian]Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre dis

www.ubnt.com©2013 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, airMAX, airOS

Installation Requirements• Rocket™M5 AC PTP, RocketM5 Titanium, RocketM5, or RocketM5GPS (soldseparately)• 16 mm or 5/8" wrench• 24 mm or 15

Hardware InstallationImportant: Carefully handle the Dish Antenna with Radome. Deformations in its shape may reduce the effectiveness of the RocketDis

2. Attach the RocketM to the Dish Antenna with Radome. a. Align the mounting tabs on the back of the RocketM with the Rocket mounting bracket. b. S

3. Attach the other end of the RF Cables to the RF connectors in this combination: Chain 1 to H and Chain 0 to V.HVHV*720-00057-01*720-00057-01

4. Attach the Protective Shroud. a. Align the hash mark on the top of the shroud with the notch on the Dish Antenna with Radome. b. Rotate the shro

5. The Elevation Rod includes washers and nuts. Remove one nut, one spring lock washer, and one washer. Use them to secure the Elevation Rod when ass

9. Each M10x25 Carriage Bolt includes a washer, spring lock washer, and nut. Remove these and use them to secure the bolts when assembling.10. Attach