Ubiquiti Networks M365 Specifications

Carrier-Class airMAX® BaseStationModels: PBM3, PBM365, PBM5

Powering the PowerBridgeMThe PowerBridgeM can be powered by the included PoE Adapter or any of the following compatible PoE switches:• TOUGHSwitch Po

3. Connect the Power Cord to the power port on the PoE Adapter. Connect the other end of the Power Cord to a power outlet.Connecting to a PoE SwitchC

Accessing airOSVerify connectivity in the airOS Configuration Interface. 1. Make sure that your host machine is connected via Ethernet to the PowerB

SpecificationsPBM3 / PBM365 / PBM5Dimensions445 x 416 x 34 mmWeight 3.82 kgOperating FrequencyM3M365M53300 - 3700 MHz3650 - 3675 MHzWorldwide: 5470 -

Safety Notices1. Read, follow, and keep these instructions.2. Heed all warnings.3. Only use attachments/accessories specified by the manufacturer.W

Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from de

ReturnsNo Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS d

Limitation of LiabilityEXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE

ComplianceFCCChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the eq

Cet appareil numérique de la classe A est conforme à la norme NMB-003 Canada.Pour réduire le risque d’interférence aux autres utilisateurs, le type d’

IntroductionThank you for purchasing the Ubiquiti Networks™ PowerBridge™M. This Quick Start Guide is designed to guide you through the installation, a

RoHS/WEEE Compliance StatementEnglishEuropean Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging

EspañolLa Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junt

Declaration of ConformityČesky [Czech]UBIQUITI NETWORKS tímto prohla uje, e tento UBIQUITI NETWORKS device, je ve shod se základními po adavky a dal

Italiano [Italian]Con la presente UBIQUITI NETWORKS dichiara che questo UBIQUITI NETWORKS device, è conforme ai requisiti essenziali ed alle altre dis

www.ubnt.com©2012-2013 Ubiquiti Networks, Inc. All rights reserved. airMAX, airOS, EdgeRouter, PowerBridge, TOUGHCable, TOUGHSwitch, Ubiquiti Networks

Hardware OverviewPortsEthernet Port(10/100) MbpsResetButtonPort Cover U-BracketsEthernet Port The Ethernet port is a 10/100 Mbps port used for data a

LEDsPower The Power LED will light green when the device is connected to a power source.Ethernet The Ethernet LED will light steady green when an ac

Installation Requirements• 13 mm or ½" wrench• Flathead screwdriver• Shielded Category 5 (or above) cabling should be used for all wired Ether

*720-00065-02*720-00065-022. Connect an Ethernet cable to the Ethernet Port.3. Close the Port Cover and lock it in place by turning the locking scre

5. Connect the Pole Brackets to the U-Brackets using the four Flange Bolts.

6. Mount the PowerBridgeM to the pole:a. Position the Carriage Bolts around the pole at the mounting location.b. Slide a Pole Clamp onto each pair

8. Adjust the elevation angle as needed:a. Loosen the four Flange Bolts on the U-Brackets.b. Adjust the PowerBridgeM to the desired elevation tilt.