Ubiquiti Networks AM-5G20-90 Specifications download pdf (Page 9)

9. The antenna has an electrical downtilt of 2°. To further

adjust the elevation angle:

a. Loosen the four Serrated Flange Bolts on the U-Brackets

and the two Serrated Flange Nuts on the upper

PoleClamp.

b. Slide the antenna to the desired tilt. (The brackets may

slide along the pole, depending on the angle of the

elevation tilt.)

c. Tighten all bolts and nuts to approximately

25N-m(18lb-ft) or less to avoid deforming thepole.

Serrated Flange Bolt

Serrated Flange Nut

Serrated Flange Bolt

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

No comments

Ubiquiti Networks AM-5G20-90 Specifications Page 9