Ubiquiti Networks M2 Setup Guide download pdf (Page 4)

Page 4

Page 5

AC OS X 10.5 (Leopard)

• Click on the Apple icon then System Peferences

• Click on Network:

• Select Ethernet:

• Fill in like like this:

• Click on Apply:

• There should now be 2 LEDs lit on the Nanostation (power + network cable).

NOTE for other Mac versions: if you have two TCP/IP settings, then choose IPv4.

(Option: create a

Location conguration

named Nano to quickly

return to these settings

in the future)

GENERAL NOTES

• AirOS rmware versions (rmware on a device is like the operating system on a

computer): the current version is AirOS 5.3.2 as pictured here in the screen shots. If you

receive a unit with a later rmware (or if you update it later), additional settings may be

visible.

• Resetting device: Should you be unable to connect to the Nanostation after changing

any settings (by mistake), it can be reset to it’s original default conguration (a hard reset)

by pressing the reset button (little hole, inside cover) for 20-30 seconds, with the power

on. The LED light should ash after releasing button.

• Directional antenna: The built in antenna points to the front of unit (LEDs are on back)

with a horizontal beam width of about 60 degrees:

1 2 3 4 5 6 7 8 9 10

No comments

Ubiquiti Networks M2 Setup Guide Page 4