Ubiquiti Networks M2 Setup Guide download pdf (Page 7)

Page 6

Page 7

• Click on the Wireless tab →

• Click Apply when it appears at the top:

Now all the changes will come into effect.

• Note: At this point communication with the Nano is lost because we still need to change the

computers IP address to be in the same (new) range as the Nano (192.168.10.x). The setting

can be either xed (manually to e.g. IP=192 168.10.21, Subnet mask=255.255.255.0, Gateway/

Router/DNS=192 168.10.20), or automatic which is simpler and more exible (as it allows you to

take the computer to another wired network and automatically acquire the settings):

Change Nano mode to Station

(i.e. receiver or ‘client’)

Make sure output power is on max

Leave rest as shown.

Click Change

• Windows: refer back to page 1 and 2 to

open Internet Protocol Properties:

• Mac OS: refer to pages 3 and 4 and change

Congure from Manually to DHCP, then

click Apply.

Change like this:

Then click OK twice.

YES

From now on, all these settings will remain

in place and you’ll only need to take step #3

to connect to an new WIFI access point.

What a relief!

1 2 3 4 5 6 7 8 9 10

No comments

Ubiquiti Networks M2 Setup Guide Page 7