Ubiquiti Networks airRouter HP User's Guide download pdf (Page 11)

Chapter 9: System TabAirRouter

HP User Guide

Ubiquiti Networks, Inc.

Speed Test

The Speed Test tool allows you to test the connection

speed between two Ubiquiti Networks devices that are

using firmware version 5.2 or above. It should be used

for a preliminary throughput estimation between two

network devices.

Select Destination IP A remote system IP can be selected

from the list, which is generated automatically (Select

destination IP) or may be specified manually.

Remote system access credentials (administrator

username - User and Password) should be provided for

the communication between two AirOS-powered devices.

This is required in order to establish the TCP/IP based

throughput test.

Remote WEB port The remote Web port the AirOS

powered device should be specified in order to establish

TCP/IP based throughput test (i.e. 443 port should be

specified if HTTPS is enabled in the remote system). The

ICMP throughput measurement routine will be initiated if

the WEB port of the remote system is incorrect.

Show Advanced Options Enables additional Speed Test

tool options. There are 3 options available for the traffic

direction while estimating the throughput maximum:

Direction There are three directions to choose from:

! Duplex Estimates the incoming (Rx) and the outgoing

(Tx) throughput at the same time.

! Receive Estimates the incoming (Rx) throughput.

! Transmit Estimates the outgoing (Tx) throughput.

Test Results Displays three result categories:

! Rx Displays the estimated incoming throughput.

! Tx Displays the estimated out-coming throughput.

! Total Displays the aggregated throughput.

AirView

AirView is a Spectrum Analyzer allowing you to see the

crowdedness of the radio spectrum. You need to run

this tool on a system connected to the AirRouter HP via

Ethernet. All wireless connections will be disconnected

from the AirRouter HP.

AirView Click Airview from the Tools menu to launch

AirView. On first use, the following window appears.

! Do NOT warn me about this in the future Select the

check box to bypass this window in future launches of

AirView Spectrum Analyzer.

Launch AirView Click Launch Airview to download the

Java Network Launch Protocol (jnlp) file and complete

launch of AirView. Java Runtime Environment 1.6 (or

above) is required on the client machine to use AirView.

Close this window Click Close this window to cancel

AirView launch and close this window.

Note: Launching AirView will terminate all

wireless connections on the device.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Comments to this Manuals

No comments

Ubiquiti Networks airRouter HP User's Guide Page 11

Comments to this Manuals

Related products and manuals for Routers Ubiquiti Networks airRouter HP