V0.1 Page 1 NETWORKING MANUAL
V0.1 Page 10 Indoor Station Setup The indoor station is responsible to receive the signal from the Indoor Access Point. Standard devices for this p
V0.1 Page 11 Barn Setup Scenario 1 - Wireless to Wired Client Outdoor Station connected directly to Maximus Control communication port via standa
V0.1 Page 12 Scenario 2 - Wireless to Wired Clients Outdoor Station connected to indoor switch via standard network cable. Maximus Control communic
V0.1 Page 13 Scenario 3 - Wireless to Wired & Wireless Clients Outdoor Station connected to indoor switch via standard network cable. Maximus C
V0.1 Page 14 Scenario 4 - Wireless to Wireless clients Outdoor Station connected directly to Indoor Access Point via standard network cable. Indoor
V0.1 Page 2 Table of Contents Introduction Internet Setup All-in-One - Modem & Router Standard Modem Primary Access Point Setup Indoor Access P
V0.1 Page 3 Introduction This guide is designed for use with Ubiquiti networking systems and will cover the basic setup to get internet to the maxi
V0.1 Page 4 2. Find devices DHCP server setting and keep note of them. Standard DHCP settings are as follows: a. Gateway IP: 192.168.1.1 b. DNS
V0.1 Page 5 Note: You may continue past 192.168.5.52 if more than 3 Maximus control systems are installed. 7. Click Save. The window will close.
V0.1 Page 6 ● If cable or cellular modem set to DHCP. (Videotron) Note: Skip to section d. ● If DSL set to PPPoE. (Bell) iii.PPPoE Username - Ent
V0.1 Page 7 Primary Access Point Setup In this section we will cover the fields that need to be edited in order to setup the Primary Access Point.
V0.1 Page 8 Indoor Access Point Setup The indoor barn Access Points are responsible for broadcasting the signal received from the outdoor stations
V0.1 Page 9 Outdoor Station Setup The outdoor wireless station (client) is responsible for receiving the signal from the primary station. Standard
Comments to this Manuals