Ubiquiti Networks AirRouter User Manual download pdf (Page 8)

V0.1

Page 8

Indoor Access Point Setup

The indoor barn Access Points are responsible for broadcasting the signal received from the

outdoor stations to the wireless clients inside the barn. Standard devices for this purpose are

the PicoStation and, if a more powerful directional signals are needed, NanoStation

1. Logon on to the device. The IP address to type into your browser is written on the

device’s box. Usually 192.168.1.20.

a. Username: ubnt

b. Password: ubnt

2. Click Wireless tab.

3. Edit the following fields

c. Basic Wireless Settings - section

i.Wireless Mode - Access Point

ii.SSID - Maximus Indoor

iii.Country Code - Canada

iv.Channel Width - 20 MHz

4. Click “Change”

5. Click “Network” tab

6. Edit the following fields

d. Network Role - Section

i.Network Role - Bridge

e. Network Settings - Section

i.Bridge IP Address - static

ii.IP Address - Recommended to select and IP in the 192.168.5.10-49 range

that is unused.

iii.Gateway IP - 192.168.5.1

iv.Primary DNS IP - 192.168.5.1

7. Click “Change”

8. Click “Advanced” tab

9. Edit the following fields

f. Advanced Wireless Settings - Section

i.Distance - Set the slider to the distance of the furthest station.

10. Click “Change”

11. Click “System” tab

12. Edit the following fields

g. Device - Section

i.Device Name - MaximusIAP10* (* set the number to the last set of digits

assigned in the IP address of step 6, section b, stage ii)

h. Date Settings - Section

i.Timezone - Set to local timezone

13. Click “Change”

14. Click “Apply”

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Ubiquiti Networks AirRouter User Manual Page 8

Comments to this Manuals

Related products and manuals for Routers Ubiquiti Networks AirRouter