Ubiquiti Networks airFiber User's Guide download pdf (Page 10)

Chapter 1: InstallationairFiber

AF-5X User Guide

Ubiquiti Networks, Inc.

Mount to an Antenna

The AF‑5X can be mounted to an airFiberX antenna or an

airFiberX converted RocketDish. The airFiberX Antenna

(AF-5G30-S45) is shown in the following steps:

1. Attach the AF‑5X to the mounting bracket.

a. Align the mounting tabs on the back of the AF‑5X

with the mounting bracket.

b. Slide the AF-5X down to lock it into place.

2. Attach the RF cables from the antenna feed to the RF

connectors on the AF‑5X in this combination: +45°to

Chain 0 and -45° to Chain 1.

3. Attach the External GPS Antenna to the RF connector

labeled GPS. Then, place the magnetic External GPS

Antenna on the bracket (this is temporary; you will

mount the External GPS Antenna on the GPS Antenna

Mount at the site).

4. Attach the protective shroud.

a. Align the hash mark on the top of the shroud with the

notch on the dish antenna.

b. Rotate the shroud clockwise until it locks into place.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 49 50

No comments

Ubiquiti Networks airFiber User's Guide Page 10